ECM (computer) good used or NOS.

Metal emissions tube that runs above water pump.

Set of Collctor Edition wheels.

If you can help, email me at thekamers@kc.rr.com

Thanks,

Mike

Hi Mike, and welcome to the CE registry....

The stock ECM's should be pretty easy to find, lots of guys are changing them out of their 82's for a newer model that can be programmed on the fly... If no one here pops up with one try asking on the crossfire forum...
http://www.crossfire.homeip.net/

The metal tube is going to be the hard one, I pulled mine off, but another guy already has dibs on it if I ever decide to sell it... Your best bet is going to be to keep asking every where you go, and keep searching the online vette junk yards.
Heres a couple of links to get you started...
http://www.corvettejunk.com/
http://www.corvettepartssalvage.com/index.html
http://www.artscorvetteparts.com/

Try email them about the part and see if any of them have a lead...

For the rims, the only place I ever see any for sale is on Ebay, if we see any pop up for sale there, I'm sure we will let you know...

_________________
Arizona Corvette Enthusiasts
Gone, but not forgotten

Anyone have any wheels for sale? Still looking.

If I find a set, does anyone have any idea what they would be worth?

Thanks,

Mike

Mike,

When you find a set of wheels they shouldn't go over $1500 and that's with the center caps also. If you find wheels with no caps just reduce $500.

Good Luck with your hunt.

_________________
C3VR Lifetime Member # 51
NCM Lifetime Member #1353
Iron82

Hi there is a complete set of wheels and caps on ebay. Type in item number 8053902346 and you will see the set. The guy has a full description of the wheels and caps. Hope this helps. I see them on ebay all the eime. type up ebay then type up collectors. collectors corvette 82 and all items for sale will show. I am always on the look out for the johnny lightening die cast car and I always find them on ebay now and then. April The Vettelady.

_________________
Chicks with vettes rule. April The Vettelady.

everyone wants that metal emissions tube...damn, that's why i saw one for 200 on ebay...and I gave mine away LOL I'm an idiot

However, that tube is rpetty easu to fab with a tubing bender (hadn bender will bend that stuff) and a welder, preferrably tig for those spot welds. The tap is easily made and the spread ends on the tube aren't that hard to do either. So if you get creative you can make a new tube, in fact you could drill out the spot welds on the old tab and not even have to fab a new one.