It is currently Thu Dec 12, 2024 8:13 am



All times are UTC - 5 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Mon Oct 02, 2006 4:17 am 
Offline
Forum Member
Forum Member

Joined: Sun Oct 01, 2006 6:46 pm
Posts: 15
Location: Browns Mills, NJ
I normally do all normal maintenance on my cars myself but I took a look at doing the spark plugs and wires and it looks like Mission Impossible in order to do them!

Anyone have any helpful tips or write ups on how to do this your self? The Haines manual is no help at all. I am guessing you would go from underneath?

Thanks in advance for any info on this matter.

-Brian


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 8:03 am 
Offline
Veteran Forum Member
Veteran Forum Member

Joined: Fri Oct 10, 2003 10:21 am
Posts: 377
Location: Frankfurt/Germany
Brian,
not much help from here, because i had mine at a Chevy dealer when i had an issue, they changed the plugs and the wires at that time (to fix a cylinder/plug fouling every 2000 miles). When i talked to the mechanic, he said that some you get to from above, and some from under the car.

Sorry


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 4:54 pm 
Offline
Forum Member
Forum Member

Joined: Sun Oct 01, 2006 6:46 pm
Posts: 15
Location: Browns Mills, NJ
Thanks for the info, not sure if its worth the hassle or if I should just spend the $130 to get it done for me? :?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 03, 2006 7:19 am 
Offline
Veteran Forum Member
Veteran Forum Member

Joined: Fri Oct 10, 2003 10:21 am
Posts: 377
Location: Frankfurt/Germany
K9 Vette wrote:
Thanks for the info, not sure if its worth the hassle or if I should just spend the $130 to get it done for me? :?


I'll go and check my Shop Manual and see what they're describing, that might clear it up a bit.. I'll be back tomorrow am.. :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 03, 2006 10:10 am 
Offline
Senior Member
Senior Member

Joined: Sat Apr 01, 2006 10:44 am
Posts: 44
Location: Atlanta Ga.
They are not mission impossible but close! The plug wires are routed along the lower portion of the heads and some under the motor mounts. You will also have to remove some shielding. As said above some can be done from above and some from below..$130 sound like a good deal if it includes the parts. Just be sure they put all the shielding back.

_________________
82 CE # 10494

Other Vette's
1996 LT4 CE
1991 ZR-1
1995 LT1
2004 LS1


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 03, 2006 6:42 pm 
Offline
Moderator
Moderator

Joined: Sat Dec 13, 2003 2:45 pm
Posts: 463
Location: Driving to paradise
If you are facing the engine from the left and right sides. You can get the first and middle spark plugs from the top and the last/rears that are closes to the fire wall from the bottom.

_________________
C3VR Lifetime Member # 51
NCM Lifetime Member #1353
Iron82


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 04, 2006 7:56 am 
Offline
Veteran Forum Member
Veteran Forum Member

Joined: Fri Oct 10, 2003 10:21 am
Posts: 377
Location: Frankfurt/Germany
82ColEd wrote:
K9 Vette wrote:
Thanks for the info, not sure if its worth the hassle or if I should just spend the $130 to get it done for me? :?


I'll go and check my Shop Manual and see what they're describing, that might clear it up a bit.. I'll be back tomorrow am.. :wink:


Brian,
i checked my shop manual, but i am guessing they figured, it's for a car shop so you SHOULD know how to take them out. I havent found anything usefull in regards to best way of replacing the plugs in there.
If it were me, i'd probably spend the money and not have to worry about it.

-Stefan


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 04, 2006 7:55 pm 
Offline
Moderator
Moderator

Joined: Sat Dec 13, 2003 2:45 pm
Posts: 463
Location: Driving to paradise
82ColEd wrote:
If it were me, i'd probably spend the money and not have to worry about it.

-Stefan


I agree with Stefan.

_________________
C3VR Lifetime Member # 51
NCM Lifetime Member #1353
Iron82


Top
 Profile  
 
 Post subject: Spark plugs
PostPosted: Sat May 05, 2007 6:08 am 
Offline
Forum Member
Forum Member

Joined: Tue Apr 24, 2007 7:54 pm
Posts: 21
Location: Blandon, PA
I was having issues with my car and had to pull the plugs so many times that I could do it blindfolded. I could get plugs 2,4,6,8 on the right and 1,3 on the left from the top. Plugs 5,7 get from underneath. I also put new looms on the car, a little bit of a pain but not that bad. Again some of the work was from top and some from underneath. If you can jack the front end up all the better. :D


Top
 Profile  
 
 Post subject: plugs
PostPosted: Sat May 05, 2007 3:23 pm 
Offline
Veteran Forum Member
Veteran Forum Member

Joined: Tue Oct 03, 2006 9:57 am
Posts: 97
Location: Chipley Florida
Iron 82 wrote:
82ColEd wrote:
If it were me, i'd probably spend the money and not have to worry about it.

-Stefan


I agree with Stefan.


ME TOO! :wink:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Original Replacement Car Auto Decals, Graphics, Stickers for GM, Mopar, Plymouth, Dodge, Ford and AMC; Trans Am, Formula, Firebird, Camaro, Z28, Corvette, El Camino, Chevy and Mustang.



Powered by phpBB® Forum Software © phpBB Group