http://corvetteaddiction.com/82ce/forum/

carpet
http://corvetteaddiction.com/82ce/forum/viewtopic.php?f=4&t=5		 Page 1 of 1
Author:  vette_guy [ Fri Sep 03, 2004 10:49 am ]
Post subject:  carpet
bigdaddy
Senior Member



Joined: 11 May 2004
Posts: 31

Posted: 07 Jun 2004 09:11 pm Post subject: carpet

--------------------------------------------------------------------------------

who should i get replacement carpet from for my ce

Back to top


macguyver
Forum Member



Joined: 26 Mar 2004
Posts: 21
Location: central florida
Posted: 08 Jun 2004 09:49 am Post subject:

--------------------------------------------------------------------------------

I got mine from Al Knock. They specialize in corvette interiors ONLY. I had a a interior specialist pu it in for me and he said it was a very good set. I did have a small problem ,when I got the set I found that the pieces that go on the back of the seat were cut about 3/16" to small all the way around,called them up and the sent me two new pieces XXL to custom fit myself.I know a couple of restoration shops use them.

Back to top


S Ridner
Veteran Forum Member



Joined: 10 Aug 2003
Posts: 75
Location: Macomb Mi
Posted: 08 Jun 2004 02:45 pm Post subject:

--------------------------------------------------------------------------------

Al is the best that I know of for Collector interior parts. www.alknochinteriors.com

Back to top


bigdaddy
Senior Member



Joined: 11 May 2004
Posts: 31

Posted: 08 Jun 2004 09:28 pm Post subject: carpet

--------------------------------------------------------------------------------

Thanks to both of you. I'll check w/ Al.
Bigdaddy

Back to top


bigdaddy
Senior Member



Joined: 11 May 2004
Posts: 31

Posted: 09 Jun 2004 06:25 pm Post subject: carpet

--------------------------------------------------------------------------------

I checked with Al Knoch's & his CE carpet sets were $ 389.00 + shipping!!
I called Rik's Unlimited Corvette Parts ( close to me in NC ) and he gets his carpets from the same manufacturer ( I can't remember the name! ) that Big Al does & is $ 100.00 CHEAPER! I still pay shipping & tax and still save almost $ 100! Big Al's website shows a price of $ 289.00 & when I questioned them about it, they refused to honor that price saying "There has been a price increase"! Maybe you guys got yours at the old price, but I won't pay that much for ANY carpet! Rik's has always been in line with everybody else, or even cheaper. If your not familiar with Rik's, check him out online, you might be pleasantly surprised.
Thanks again to you guys for the suggestion.

bigdaddy

Back to top


S Ridner
Veteran Forum Member



Joined: 10 Aug 2003
Posts: 75
Location: Macomb Mi
Posted: 09 Jun 2004 08:43 pm Post subject:

--------------------------------------------------------------------------------

Al use to make his own Collectors carpeting. After reading this I called and talked to Dale whom I have done a lot of stuff with. Seems that you are correct that all Collector does come from the same place America Custom Carpet. Riks is a great parts source. Have done alot of business with Rik And Laurie and they are very reliable and get you the parts in a timely fashion and at competive prices. I do highly recommend Riks if you need a part. Stephen

Back to top


Iron 82
Senior Member



Joined: 13 Dec 2003
Posts: 43

Posted: 09 Jun 2004 08:54 pm Post subject: Re:

--------------------------------------------------------------------------------

S Ridner wrote:
Al use to make his own Collectors carpeting. After reading this I called and talked to Dale whom I have done a lot of stuff with. Seems that you are correct that all Collector does come from the same place America Custom Carpet. Riks is a great parts source. Have done alot of business with Rik And Laurie and they are very reliable and get you the parts in a timely fashion and at competive prices. I do highly recommend Riks if you need a part. Stephen


Stephen,
Your right on with Rik's Parts! Got my shield from them. And they're sending me a catalog too. Very nice people. Only on Friday they close up shop at 12NOON. I recommend them too.

IRON 82

Back to top


steveburges
Veteran Forum Member



Joined: 07 Oct 2003
Posts: 66
Location: Mountain Home, Arkansas
Posted: 17 Jun 2004 01:28 pm Post subject:

--------------------------------------------------------------------------------

When you put your new carpet in, you may find that your side panels
for your console are broken where they bend a little or you may tear
them up trying to get the old carpet off. If you do, find some 1/8"
masonite sheeting(like pegboard panelling without the holes) and
lay your old side panels on and trace as a pattern. That is a good fix
and the masonite stays stiff enough and bends just enough to work
well. Use spray adhesive you can find at walmart or parts stores to
affix the carpet. Also, while you have that old carpet out, get some
good heat shielding and underlayment. You can find the aluminumized
on ebay already precut and moulded. I cleaned my old floorboard down
to bare then undercoated new and built everything up new to get any
old musty smells out and make everything smell new and clean on
those hot days. Take your time and make everything clean and new
while you have it gutted and you will be happy you did later.
Steve
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/