I've heard that the high speed works off a seperate relay and that my problem more than likely is the blower resitor.Does this sound right? anybody been here before?I went ahead and ordered one from Ecklers.Onlt $17.00.

I had the same problem with mine once & had to replace the relay that mounts to the firewall. Took about 2 min. & solved the problem.

The part was cheap so I went with you idea.Didn't work.You are talking about the thing that has some springs on it right?

No, I replaced that part first, and like you, that wasn't the problem. The relay is a small silver doo-hicky that has a small harness plugged into it. It is mounted up near the cowl on the right hand side of the firewall.

I don't have my car here right now so I can't give you an exact location. But it looks like a typical relay.

Sorry, I can't give you any more than that.

Is this the one???

That would be it.

Thanks Dawg for your techno wizardry!

Thank you.I guess that my next move

blower speed is regulated by that resistor bridge that moutns into the heater box, it's that thing w/ the 2 screws and the connector on top. If you take it out you'll see a couple of springs like the insides of a bread toasters each spring is a different resistance and a blower speed setting. Check the connector and wiring, if the blower only works on hi it's a problem w/ that birdge as it only handles all speeds below hi.

damn..bunch of typos... anyway check relay, if not relay check resistor bridge. and because I lost my login I can't edit my messages...

whadda ya know I logged in

You amaze me.

_________________
C3VR Lifetime Member # 51
NCM Lifetime Member #1353
Iron82

He is right on the moneys i paid $8.00 for the relay it fixed the same problem I had . Works great now!