http://corvetteaddiction.com/82ce/forum/

Manifold bolts
http://corvetteaddiction.com/82ce/forum/viewtopic.php?f=4&t=18		 Page 1 of 1
Author:  vette_guy [ Fri Sep 03, 2004 11:24 am ]
Post subject:  Manifold bolts
bigdaddy
Senior Member



Joined: 11 May 2004
Posts: 31

Posted: 17 May 2004 11:07 am Post subject: manifold bolts

--------------------------------------------------------------------------------

Does anyone know if the mounting bolts for the CFI manifold plate need to be torqued in the sequence as the manifold bolts?

Back to top


TwinTurbo
Guest





Posted: 17 May 2004 08:51 pm Post subject:

--------------------------------------------------------------------------------

yes they do. I don't think any manual mentions it but you work in a circular motion just like you do with cylinder heads. Just follow the spiral, starting with the TB studs on the outside.

Back to top


Desertdawg
Moderator



Joined: 17 Sep 2003
Posts: 159
Location: Gila Bend Arizona
Posted: 18 May 2004 12:15 am Post subject:

--------------------------------------------------------------------------------

Thanks for checking and posting answers on our forum Marck, I was going to ask you this question in IM.

You beat me to it.
_________________
Arizona Corvette Enthusiasts


Back to top


TwinTurbo
Guest





Posted: 18 May 2004 05:20 am Post subject:

--------------------------------------------------------------------------------

I once made a small image with numbers for a proper sequence, there are other ways of doing it but this is the way I used to and it gives good results. It's somewhere on the CFI Vault but I can't find it LOL

Back to top



Guest





Posted: 18 May 2004 03:04 pm Post subject:

--------------------------------------------------------------------------------

a general rule of thumb for torquing is to torque from the center out

Back to top


bigdaddy
Senior Member



Joined: 11 May 2004
Posts: 31

Posted: 25 May 2004 09:36 am Post subject: Manifold bolts

--------------------------------------------------------------------------------

I torqued manifold plate bolts from the center out & it worked! I replaced all gaskets involving the CFI & rebuilt the throttle-bodies while I was at it. It took several different kits to get all that was needed. I have some duplicate pieces left over. If anyone might be interested, let me know & I'll make a list & get some pictures of them.

bigdaddy
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/