http://corvetteaddiction.com/82ce/forum/ |
|
| Cam choice http://corvetteaddiction.com/82ce/forum/viewtopic.php?f=4&t=143 |
Page 1 of 1 |
| Author: | copter [ Wed Nov 09, 2005 8:19 pm ] |
| Post subject: | Cam choice |
I want to bump up my get up and go to my stock 82CE.I just want a cam change,don't want to get way in the engine.Looking for more bottom end HP/TQ.I'm keeping the crossfire stuff,trying to remain origanilty.Got and ideas?  Oh yes I'm still looking for rear hinges.Havent givin up.Giving up means accepting defeat.
|
|
| Author: | Desertdawg [ Thu Nov 10, 2005 2:34 am ] |
| Post subject: | |
You can install either the crane 2040 or 2030, it should work fine with your stock computer. The 2030 is a mild version, 2040 is bigger Tim Allen style. Also look at installing a set of quality 1.5 rockers or 1.6 rockers. The stock ones are known for being less than advertised, since they were massed produced, the tolerances were always off a little. Good & Cheap http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?lang=-1&catalogId=10002&storeId=10001&categoryId=25465 Better http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?lang=-1&catalogId=10002&storeId=10001&categoryId=13701 I have an L79 cam and a set of the better rockers (1.6 ratio) that I will probably use in the motor I'm going to put together. Hopefully before hell freezes over... I know of one other 82 owner that went with an L79 cam with new heads, and headers, and he was impressed with the performance... |
|
| Author: | copter [ Thu Nov 10, 2005 9:46 am ] |
| Post subject: | |
Thanks,thats a start.I'm trying to find something like you suggested with the rockers.I don't want to swap heads and I know I should but I'm still wanting the stock thing.If I can get buy with a cam and rockers and more bottom end out of it I'll be a happy camper. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|