Good to hear !!
http://corvetteaddiction.com/82ce/forum/ |
|
| Air injection pipe http://corvetteaddiction.com/82ce/forum/viewtopic.php?f=1&t=276 |
Page 1 of 1 |
| Author: | WARRIOR2291 [ Mon Nov 06, 2006 8:09 pm ] |
| Post subject: | Air injection pipe |
Hello everyone, Well good news I got my motor in the car and I am hooking everything back up. Been quite a learning experience for me and I have been getting my hands real dirty. Its great to work on your own stuff thats for sure. I have a problem maybe you can help me. I have a 1982 shop manuel I bought from Helmes. On page 6E-65 it shows a "Air injection pipe" does anyone know where I can buy one? MIne is broken and was ate up real bad so I need to replace it. Does anyone know where I can get one ???? Thanks for the Help as always! Edited Subject by Iron 82 |
|
| Author: | Desertdawg [ Tue Nov 07, 2006 12:05 am ] |
| Post subject: | |
That one part is almost impossible to find. I say almost because I happen to have one is good shape.... BUT, it's already promised to another member, I just haven't contacted him yet. What has been used in the past is some high temp rubber hose, I don't know exactly what type to tell you to get, so you might have to experiment some. |
|
| Author: | WARRIOR2291 [ Tue Nov 07, 2006 6:21 am ] |
| Post subject: | 82collector |
Thank you sir, it hard to imagine no one would make that part , but I have been looking for 3 hours today and no luck. |
|
| Author: | ddbjr [ Tue Nov 07, 2006 10:03 am ] |
| Post subject: | |
Temporarily you can use a rubber hose but that isn't a good long term decision. As noted above they are very difficult to find and expensive when you do. You might want to use the old one to have a copper one formed from. donald |
|
| Author: | WARRIOR2291 [ Tue Nov 07, 2006 6:24 pm ] |
| Post subject: | 82collector |
Thas a good idea. I got the old one so I will see if ZI can find someone to make one for me. Well I got the car up and she is running fine now . The motoer is great and I am having my old one rebuilt. So I will have the originial motor sittng ready to re-install........... Now bring on those hinges for the rear hatch and I am ready |
|
| Author: | 82ColEd [ Wed Nov 08, 2006 8:01 am ] |
| Post subject: | |
Good to hear !!
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|